Skip to main content
Flowroute

E911

The following article describes creating E911 records as well as adding and removing them from numbers. 


NOTE:  An address associated with E911 is used to add an extra layer of information to your E911 service. The address associated with E911 allows your location to be more accurately pinpointed based on the provided address information. You can set as many addresses as you need, each identified by a reference label you set for the address. The public-safely access point (PSAP) can then use this information in the event of an emergency to help locate you if you are unable to respond.

To create an E911 Entry:

  1. Log on to your Flowroute Manage account.

  2. Click the DIDS menu, and then click E911.

    Screen_Shot_2015-05-07_at_11.55.08_AM.png

 

  1. In the Addresses section, click Add Address.

    • The Add E911 Address page appears.

  2. Complete all information on this page.

    E911-1.jpg
    • In the Label field, enter a label name identifying the address you are adding. For example, this might be Work

    • From the Address type drop-down list, select a location to more accurately pinpoint your location. For example, if you work in a building where multiple companies are based, select Floor

    • In the Address type number, enter the value associated with the Address type. For example, if you selected Floor for the Address type, enter 6 if your office is located on the sixth floor of the building. 

  3. Once you have completed the form, click Validate and add.

NOTE: A validated E911 address can be edited after saving. Once saved, an Edit button appears on the E911 page.

To enable E911 services:

  1. Log on to your Flowroute Manage account.

  2. Click the DIDS menu, the manage your DIDs page appears.

    E911-3.jpg

 

  1. Select the check box for each DID you want to apply an E911 address to.

  2. Click Choose a DID Action, click Enable/Adjust E911 Profile.

    E911-4.jpg

 

  1. Click Apply Action. The E911 Details page appears.

  2. Click the Search for an E911 Address drop down and from the list, select the E911 address you added. If you added multiple E911 address, select the applicable address from the list.

    • The Charge Details section of the page will display the applicable monthly recurring charges (MRC) for the service. 

      E911-5.jpg
  3. Review the E911 details, and then click Confirm Order. 

    NOTE:The request is processed, and the Manage your DIDs page appears. Any DID for which you applied the E911 service now displays on the page with the label in the E911 column:

    E911-6.jpg

IMPORTANT: 

Ensure that your equipment's dial plan is set up to send outbound 911 calls to Flowroute with the North American 10 or 11-digit DID number that you want. For example, both of the following formats are accepted: 

  • 10-digit: 2062995555 

  • 11-digit: 12062995555 

 

To disable E911 services:

  1. Log on to your Flowroute Manage account.

  2. Click the DIDS menu, the manage your DIDs page appears.

    E911-6 (1).jpg
  3. Select the check box for each DID you want to remove an E911 address from.

  4. Click Choose a DID Action, click Disable E911 Service.

    disable_e911-1.jpg

 

  1. Click Apply Action

    disable_e911-2.jpg

Your request has been processed. The Manage your DIDs page appears with the E911 removed from its association with the DID. In addition, any monthly recurring charges (MRC) are removed.

  • Was this article helpful?