Skip to main content
Flowroute

Configure Outbound Rules for the 3CX 14 and 15 Phone Systems

The following article describes configuring outbound rules for your Flowroute SIP trunk for for 3CX version 14 SP 2 PBX phone system and the 3CX version 15 phone systems.

To configure outbound rules for your Flowroute SIP trunk in 3CX:

  1. Select Outbound Rules in the 3CX Phone System Management Console navigation pane.
  2. Click Add Outbound Rule add a rule for 10-digit local dialing.
  3. Enter the information as displayed in the highlighted fields below, and then click OK:
  4. Click Add Outbound Rule to add a rule for local 11-digit dialing.
  5. Enter the information as displayed in the highlighted fields below, and then click OK:
  6. In you make international calls, click Add Outbound Rule again to add a dialing rule for international calls.
  7. Enter the information as displayed in the highlighted fields below, and then click OK.  

    NOTE: In the following diagram, replace 011 with the country code for which you want to set up the international rule.


Optional: Add seven-digit dialing for your local area

  1. Click Add Outbound Rule to add seven-digit dialing.
  2. Enter the information as displayed in the highlighted fields below, adding 1 plus your area code (with no spaces between numbers) in the Prepend field—for example, 1206, and then click OK.