Technical Configurations

Set an Outbound Caller ID in the 3 CX 12 Telephone System

This guide describes setting up outbound caller ID on 3CX in a Windows environment using 3CX version 12. To set the outbound caller ID in 3CX 12 Open the 3CX Phone System Management Console. In the left...

Read Article

Configure an Outbound Route Dial Pattern for FreePBX

The following article describes configuring the FreePBX for Flowroute through the FreePBX UI. To configure an outbound route dial pattern: In the FreePBX UI, click Connectivity, and then click Outbound Ru...

Read Article

Obihai OBi202 ATA Configuration Guide

IMPORTANT: Details in this document are for reference only, and are unsupported by the Flowroute support staff. Please use as purely reference material, we make no guarantees that this information i...

Read Article

Configure Cisco/Linksys SPA or PAP2T ATA

IMPORTANT: Details in this document are for reference only, and are unsupported by the Flowroute support staff. Please use as purely reference material, we make no guarantees that this information is...

Read Article

Configure sipXecs

IMPORTANT: Details in this document are for reference only, and are unsupported by the Flowroute support staff. Please use as purely reference material, we make no guarantees that this information i...

Read Article

Configure Cisco Unified Communications Manager

IMPORTANT: Details in this document are for reference only and are unsupported by the Flowroute support staff. Please use as purely reference material; we make no guarantees that this information is ...

Read Article

Forward a port on Grandstream IP Phones

This article describes how to forward a port on Grandstream IP phones. To forward a port: Log on to the device. Click the Basic Settings tab. Enter your network details on the Basic Settings page. ...

Read Article

Advertise your Public IP in your SIP Signaling on Asterisk-based PBXs

This article describes advertising your public IP in your SIP signaling on Asterisk-based PBXs. If your Asterisk-based PBX is behind NAT or is advertising a private IP, such as 192.168.0.2, in your SIP signalin...

Read Article

Generic PBX or phone setup guide

If we do not have setup documentation for your PBX or phone, please try to find these configuration settings on your system as most systems require the basic settings below: SIP Authentication Username: ente...

Read Article

Chan_SIP and Chan_PJSIP

Let’s look at the differences between chan_sip and chan_pjsip closer and try to point all the pros and cons out of both drivers to get a better understanding of what better fits your business or personal needs....

Read Article