System Configuration

Configure an Outbound Route Dial Pattern for FreePBX

The following article describes configuring the FreePBX for Flowroute through the FreePBX UI. To configure an outbound route dial pattern: In the FreePBX UI, click Connectivity, and then click Outbound Ru...

Read Article

Add Flowroute as a SIP Gateway in the Barracuda Phone System

This article describes adding Flowroute as the SIP Gateway in a Barracuda phone system. Before you begin Have your Flowroute SIP Credentials and Tech Prefix. These can be found on the Interconnectio...

Read Article

Obihai OBi202 ATA Configuration Guide

The following article describes configuring the Obihai OBi202 using firmware v3.0.1. Before you begin: Have your Flowroute SIP credentials (Username and Auth Username and Password) found on the Interc...

Read Article

Configure Cisco/Linksys SPA or PAP2T ATA

This article describes configuring Cisco/Linksys SPA or PAP2T ATA for use with Flowroute. It can also be used for configuring the Cisco/Linksys SPA2102 and other similar ATAs. Before you begin Have the foll...

Read Article

Configure sipXecs

This article describes configuring sipXecs to work with your Flowroute telephone numbers. Before you begin Have your Flowroute SIP Credentials. These can be found on the Interconnection > Status ...

Read Article

Configure Cisco Unified Communications Manager

This guide guides you through configuring Cisco Unified Communications Manager with Flowroute. It assumes that you are already reasonably comfortable with Cisco Unified Communications Manager (previously named ...

Read Article

Configure the Grandstream Analog Telephone Adapter (ATA)

For a Grandstream IP Phone to work with Flowroute, you'll need to set a few device configuration settings on the FXS PORT1 or FXS PORT2 page of the Grandstream ATA. This article describes those settings. Befo...

Read Article

Flowroute Service Guide - Intelligent Voice and Messaging for Experts

The attached document describes Flowroute voice and messaging services; this includes features, functionality, technical specifications, and differentiation. It is designed to serve as a reference for your sele...

Read Article

Forward a port on Grandstream IP Phones

This article describes how to forward a port on Grandstream IP phones. To forward a port: Log on to the device. Click the Basic Settings tab. Enter your network details on the Basic Settings page. ...

Read Article

Advertise your Public IP in your SIP Signaling on Asterisk-based PBXs

This article describes advertising your public IP in your SIP signaling on Asterisk-based PBXs. If your Asterisk-based PBX is behind NAT or is advertising a private IP, such as 192.168.0.2, in your SIP signalin...

Read Article